Give your website a premium touchup with these free WordPress themes using responsive design, seo friendly designs www.bigtheme.net/wordpress

Blog About Squeegees

wrap supplies

Vehicle wrapping equipments

By | Genel | No Comments

What do you need to wrap a vehicle? Do you think just vinyl or film? No.

You need lots of supplies to wrap vehicle completely so you could do great works with it. Will you full wrap or part, it doesnt matter, you have to have some materials to do it. However dont forget that the most important is technical ability in wrapping car.

Talented car wrappers make differences with their technical skill and their tools. What are those equipments?

 

Cleaning Solution: One of the most important vehicle wrapping equipments is cleaning solution to clean surface of vehicle before applying. Cleaning solution has critical importance for foil adhesion, otherwise foil doesnt stick completely to surface of vehicle and begin to remove. There are industrial soltions for these situations. We suggest to use Merken Cleaning Solution to clean all dusts on maximum level.

 

 

Knife:The utility knife which is one of the most used tools, is also useful in our daily life. Especially in order to cut the foil during the tool coating process, knife-sharp, high quality steel knife blades should be preferred.

 

 

 

 

 

Glove: Recently wear wrap gloves have used more and more popular.

 

 

 

 

 

 

Tape:The coating tapes are functional and very often used in large works in order to properly cover the overflowing parts of the film and mask unwanted areas.

 

 

 

 

 

Cutting Tape: 3M has a patent they call Knifeless, the Knifeless cutting tape makes the job of the vehicle builders much easier. It reduces the fluctuations caused by the utility knife to zero, although it is not widely used, it provides a monolithic appearance of the foil joints.

 

 

 

 

birken ragle

Squeegee: Perhaps the most important tool in this regard. It is one of the most basic materials for foil wrapping. One of the important points to consider when choosing squeegee is whether it causes damage to the foil. The roughness of the raw material from the original raw material has a high risk of stratching the foil. It is recommended to use the Birken Felt Edge Wet Squeegee in vehicle and vehicle wrapping works,

 

 

 

Heat Gun: It is one of the main tools that provide stretching of the foil on the curved edges of the surface to be wraped. Only applicators are available with heater and squeegee, but you still prefer to use other tools to finish your work faster without risking it.

How do you figure out better squeegee?

By | Genel | No Comments

There are much more types of squeegee, right? So, have you ever think why there are much squeegee? Every squeegee has produced to solved any problem, go into details, apply wide surfaces, magnetics and so on… But is it necessary?

Installers have lots of choice about squeegees, so how will you choise to better squeegee?

First of all, of course it depends purpose of using it, will you wrap a vehicle or apply to vinyl, it depends on where you use it.

Secondly, You must pay attention which vinyl do you use? Matte, chrome, window tint. Special foils and vinyls are quite sensitive to scratch and if you use ordinary squeegee, probably you will see some scratchs after apply.

In other point is which place do you use it? Curved, flat, big area, details, wet surface or dry surface. Hardness of squeegee is important for that.

Felt edge squeegee: Felt-edge squeegees are perfect tool for car wraps, cause it is stracth-free even if you apply aggressively, also its flexible enough to work a vinyl graphic into tight corners and  around difficult curves. Felt-edge squeegees are available for every type of foil and vinyls. Standart hard tools that have just only plastic, can stratch to foil. But felt edge squeegees has soft felt and absolutely stratch-free with it.

Birken felt edge squeegee has special felt. Water resist, dust-free. More information;

http://www.okcreklam.com.tr/urunlerimiz/birkenplastikkeceli/birken-plastik-keceli-ragle/

Felt Squeegee: Pure felt squeegees has natural structure and doesnt have sharpened corner. So its not available all the time for wrappers who work at cars, vehicles. However some applicators are just working with window films, of course they want to softer squeegee related with it. Also I should say that its not available for wet surfaces. Cause natural structure of felt doesnt resistant to water.

For more information about Merken felt squeegee;

http://www.okcreklam.com.tr/urunlerimiz/birkenplastikkeceli/saf-kece-ragle/

 

Plastic Squeegee: Plastic squeegees are used by many applicators, cause its cheap and useful. Able to find all colors of squeegees. Wrappers and applicators prefer it for wrapping car, they use easily in tiny details and curves. The best known is Gold squeegee by 3M.

For more information about Birken plastic squeegee;

http://www.okcreklam.com.tr/urunlerimiz/birkenplastikkeceli/plastik-ragle/

maltepe escort
maltepe escort
bostanci escort
bostanci escort
pendik escort
pendik escort
kartal escort
kartal escort
serifali escort
alanya escort
manavgat escort
side escort